HD Athletic NX Half Rack
NX STORAGE DEPTH
HD ATHLETIC NX HEIGHT
Pull Up Options
- 2X3 Xmember
- The 2X3 Xmember should be used in facilities that plan to use camera-based training systems.Compatible with HD Athletic Ball Grips (HDT-BG3)
- Offset Bar
- Maximize space with the Offset Bar. With two 1.25” textured pull-up bars, this option provides both high and low pulling points with a 9” separation to compensate for lower training uprights.
- 2-HANDLE BAR
- A Hammer Strength classic, the 2-Handle pull-up bar features 1.25” handles in mixed configurations. This pull-up option features grips on each handle and embodies one of Hammer Strengths’ true design philosophies: supreme ergonomics.
- MONKEY BAR
- The most traditional of all pull-up bars. The Monkey Bar has high versatility and is the lowest cost option. The bar is 1.25” in diameter and uses a high-wear, textured paint to enhance grip and extend the finish life.
REAR X MEMBER OPTIONS
- CUSTOM SIGN
- Looking for custom branding opportunities on your Rack? Look no further. Our Custom Signs can be made using laser cuts, vinyl stickers, or a combination of the two.
- HAMMER STRENGTH SIGN
- Make your Rack stand out with a Hammer Strength sign. The backer plate is the same color as the uprights and the front plate is high-wear charcoal for color contrast.
- SUPER DUTY XMEMBER
- The Super Duty Xmember adds structural rigidity to your Rack and serves as a mount for custom signs.
- 72" Storage Trays
- Add any 72” Storage Members from HD Athletic to connect your HD Athletic NX Racks. Available options include:- 2 Pipe for bumper plate and ball storage,- Accessory Tray for kettle bells and soft accessories,- Dumbbell Tray, and- Stability ball storage
- Hanging Bar Storage
- Hanging Bar Storage holds the barbell by its sleeve and is finished matte charcoal powder coat. This solution can be mounted on any Xmember.
- Low Bar Storage
- A convenient, low-profile bar storage solution. Inside the sleeve of each Low Bar Storage is a plastic guard to protect your bar when dropping it into the storage cylinder. The cylinder is angled slightly away from the Rack to ensure the bar can not contact the rack and damage paint.
- 72" Rack Connectors
- Monkey and Square Rack Connectors attach HD Athletic NX Racks together for more strength training versatility.
- Nordic Ham
- Compatible with all HD Athletic products, the 20” Nordic Ham can be used for exercises like single leg squats and Nordic hamstring curls. The add-on features a chrome pin and paint guards that protect the finish of the upright.
- Power Pivot
- The Power Pivot provides a rotating mount for a variety of push, pull and rotational barbell exercises.
- Band Pegs
- The original HD Athletic Band Pegs work perfectly NX Racks as an anchor to mount resistance bands or for band storage.
- Premium HR Bar Catches
- Premium Half Rack Bar Catches are 22” (56 cm) long and feature a three-sided urethane guard that protects both the catch and the barbell. Two shock absorption pads and vertical displacement brackets prevent damage to the rack. The Premium Catch attaches with a pin through the side of the rack for added strength and stability. The finish is durable high-wear charcoal powder coating with a chrome pin. ASTM rated to 495 lbs.
- Standard HR Bar Catches
- The Standard Half Rack Bar Catches are 18” (46 cm) in length and use a 3-sided urethane guard to shield the catch and the bar. The catch pins easily from the face of the rack and locks in place. The charcoal finish is a durable matte powder coating that includes paint guard tape to help protect the training uprights. ASTM rated to 405 lbs.
- Premium Bar Supports
- The Premium Bar Support is a welded ½” plate protected by an oversized, injection-molded urethane cover for bar protection. The landing area is a 2” resting zone that tapers to 1.5” for wider hand clearance. The finish is a durable high-wear charcoal powder coating with a chrome pin. The interior is wrapped with 3/8” urethane paint guards to prevent any metal-on-metal contact with the rack.
- Standard Bar Supports
- The Standard Bar Support is a welded 3/8” plate protected by an injection-molded urethane cover for bar protection. The charcoal finish is a durable matte powder coating that includes paint guard tape to help protect the training uprights. The profile of the landing and resting zone are ASTM and EN compliant.
HD ATHLETIC NX RACKS
HD ATHLETIC PRO RACKS & RIGS
Hammer Strength Benches and Platforms
|HD Athletic NX Half Rack
|Standard, Premium, Custom
|86" or 91"
|Monkey Bar, Offset Bar, 2-Handle Bar, 2x3 Square
|Rear XM Option
|2X3 Square, Super Duty XM (compatible with custom sign), Hammer Strength Sign
|Bar Catches / Supports
|Standard Bar Supports, Premium Bar Supports, Standard HR Bar Catches, Premium HR Bar Catches
|15" or 21"
|4 Pairs – Standard, 2 Pairs – Standard, 2 Pairs – Long, 4 Pairs – Long
Impact Suppression Platform
HD Athletic Pro Bridge
Product Discontinued: HD Athletic Half/Half Combo Rack
PRODUCT DISCONTINUED: HD Athletic Pro Half Rack
HD Athletic NX Half Half Combo Rack
HD Athletic NX Half Rack
HD Athletic NX Power Half Combo Rack
HD Athletic NX Power Power Combo Rack
HD Athletic NX Squat Stand
PRODUCT DISCONTINUED: HD Elite Combo Rack
PRODUCT DISCONTINUED: HD Elite Half Rack
HD Elite iD Combo Rack
HD Elite iD Half Rack
HD Elite iD Power Rack
PRODUCT DISCONTINUED: HD Elite Power Rack
Olympic Squat Rack
HD Athletic Pro Perimeter
PRODUCT DISCONTINUED: HD Athletic Pro Power Rack
HD Athletic NX Power Rack
HD Athletic Pro Rigs
Traditional Wood Platform